Canon FAX-L240, FAX-L290 manual One-touch speed dialling

7Enter up to 125 fax numbers you want to send to using any of the following methods:

❚One-touch speed dialling:

Press the one-touch speed dialling button(s) you want.

❚Coded speed dialling:

Press Coded Dial, then use the numeric buttons to enter the two- digit code you want. Repeat for other codes.

•Be sure to press Coded Dial before each code.

❚Regular dialling:

Use the numeric buttons to enter the fax number you want, then press Set.

•You can only enter one fax number this

way.

n• If you enter the wrong destination, press Clear, then enter the correct destination.

•When you have entered multiple fax numbers, use ∂ or ¨ to scroll through the numbers to review the destinations.

Ex:

Ex:

Ex:

Ex:

TEL=905 795 1111

A01

TEL=03 3758 2111

TEL= 2 887 0166

8Press Start/Copy to begin scanning the document into the FAX’s memory.

•When the preset time is reached, the FAX sends the document to the destination(s) you specified in step 7.

n• You can register up to 20 different delayed sending operations.

•If the FAX’s memory becomes full while scanning your document, MEMORY FULL will appear in the LCD. If this happens, you will not be able to send the document at a preset time. Remove the remainder of the document from the ADF (you may need to open the operation panel to do so).

•Since the FAX is multitasking, you can perform other tasks even when your FAX is set for delayed sending.

Sending Faxes

Chapter 7 Sending Faxes 7-15