Canon FAX-L290, FAX-L240 manual LCD Messages, 13-8

LCD Messages

The following messages are displayed in the LCD when the FAX is performing a task, or when it encounters an error. The error code appears in the ACTIVITY REPORT (1 p. 11-3).

Message	Error Code	Cause
AUTO REDIAL	—	The unit is waiting to
		redial the other party’s
		fax number because the
		line was busy or the
		other party did not
		answer when you tried to
		send the document.

Action

Wait for the unit to automatically redial the fax number (1 p. 7-9).

BUSY/NO SIGNAL	#018	The fax/telephone	Try sending the document
		number you dialled is	at a later time.
		busy.
		The fax number dialled	Check the fax number and
		was incorrect.	dial again.
		The other party’s fax	Contact the other party and
		machine is not working.	have them check their fax
			machine.

The other party is not using a G3 fax machine.

Contact the other party to check that they are using a G3 fax machine.

The telephone line type setting on your unit is incorrect.

The receiving fax machine did not answer within 55 seconds (after all automatic redialling attempts).

CHANGE CARTRIDGE	—	The toner inside the
		toner cartridge may be
		unevenly distributed.

Set your unit for your telephone line type (1 p. 3-8).

Contact the other party and have them check their fax machine. You can try to send the document using manual sending via the handset (1 p. 7-6). For an overseas call, add pauses to the registered number (1 p. 9-2).

Redistribute the toner inside the toner cartridge (1 p. 12-7). If the message remains, replace the toner cartridge (1 p. 12-7).

	The toner cartridge is	Replace the toner cartridge
	empty.	(1 p. 12-7).
13-8	Troubleshooting	Chapter 13