10
Table 6 — Quick Access Chart
LEGEND NOTES:
1. To change from Edit mode to Status mode, press or press
again.
2. Not all available selections will have items to select in sublevels.
AutomaticRun Test— The 50BV,XJ unit controls are
programmed with an automatic run test that checks connection
andoperation of major components. To perform the run test:
Verifythat the control display (LID device/System Monitor)
interfaceca blei sconne cted to internal jack on main controller;
that the fire alarm/shutdown switch input (FSD) has a factory
jumper or field input; that Bypass (if installed) is set in the
DRIVEposition; and that the L ocal/Off/Remote switch is set to
theREMOTE position.
NOTE: When the Local/Off/Remote switch is in the
REMOTE position, the controller time schedule is pre-set
(from the factory) as unoccupied. This means that the unit
will not turn on until the run test is enabled. However, if the
controller schedule has already been modified in the field,
and the current time ofd ay is occupied,then the supply fan
will start. The run test will shut the fan down when it
begins. The run test willcomplete and then the supply will
automaticallyrestart.
NOTE: If the Local/Off/Remote switch is in the OFF posi-
tion, it is normal for the red alarm light on the display panel
tob e lit, indicating that the unit is disabled.
NOTE:If the red light stays on when the switch is moved to
REMOTE, or if any other problems occur during the run
test, referto th eTroubleshooting section of this manual.
Toperform the Run Test:
1. Turn unit power on.
The LID display will show the controller identifica-
tion, time and date (Fig. 5):
OMNIZONE VPAC
hh:mmmm-dd-yy
LID
NUM.
KEY
LIDFUNCTION KEYS
Algorithms
(ALGO)
Status
(STAT)
History
(HIST)
Service
(SRVC)
Alarm
(ALRM)
Setup
(SET)
Schedules
(SCHD)
1AO—AdaptiveControl HardwarePoints AlarmHisto ry Function Definition Limit SetClock Occupancy
2AO—CoolingCV Software Points Analog Point Trace ChannelDefinit ion Setpoint RealTime Clock Setpoint
3AO—CoolingVAV TemperatureInput Discrete Point Trace System Definition Discrete ControllerPassword Holiday
4AO—FanTracking MilliampInput Consumable Channel Setpoint Definition First out N/A S/WSetpoint
5AO—HeatingCV CustomMilliamp Input InternalConsumable DatabaseControl Runtime N/A Network Time
6AO—HeatingVAV VoltageInput Runtime Channel Comfort Controller # of starts N/A N/A
7AO—HumidityControl CustomVoltage Input N/A CCNControl N/A N/A N/A
8AO—MixedAir CV w/IAQ Sensed Discrete Input N/A LID Preferences N/A N/A N/A
9AO—MixedAir VAV w/IAQ LatchedDiscrete Input N/A N/A N/A N/A N/A
10 AO—PermissiveInterlock Pulsed Discrete Input N/A N/A N/A N/A N/A
11 AO—Reset MilliampOutput N/A N/A N/A N/A N/A
12 AO—SharedTransducer CustomMilliamp Output N/A N/A N/A N/A N/A
13 AO—StaticPressure VoltageOu tput N/A N/A N/A N/A N/A
14 DO—Analog CustomVoltage Output N/A N/A N/A N/A N/A
15 DO—DX-StagingVAV DiscreteOutput N/A N/A N/A N/A N/A
16 DO—ElectricH eat CV Stepper MotorOutput N/A N/A N/A N/A N/A
17 DO—ElectricHeat VAV DiscreteSoftware Point N/A N/A N/A N/A N/A
18 DO—EnthalpyComparison AnalogSoftwarePoint N/A N/A N/A N/A N/A
19 DO—Interlock Network Data Out N/A N/A N/A N/ A N/A
20 DO—LightingControl Network Data In N/A N/A N/A N/A N/A
21 DO—PermissiveInterlock N/A N/A N/A N/A N/A N/A
22 DO—PumpControl N/A N/A N/A N/A N/A N/A
23 DO—PropThermo N/A N/A N/A N/A N/A N/A
24 DO—PropThermo 2 Pipe N/A N/A N/A N/A N/A N/A
25 DO—PropThermo 4 Pipe N/A N/A N/A N/A N/A N/A
26 DO—StagedThermos tat N/A N/A N/A N/A N/A N/A
27 DO—StagingControl N/A N/A N/A N/A N/A N/A
28 DO—TimeClock N/A N/A N/A N/A N/A N/A
29 DO—TimeClock w/Check N/A N/A N/A N/A N/A N/A
30 AOSSSchedule N/A N/A N/A N/A N/A N/A
31 NetworkBroadcast N/A N/A N/A N/A N/A N/A
32 Linkage/AOSSSchedule N/A N/A N/A N/A N/A N/A
33 NTFCw/Enthalpy Check N/A N/A N/A N/A N/A N/A
34 SensorGroup N/A N/A N/A N/A N/A N/A
35 WSMAir Source N/A N/A N/A N/A N/A N/A
36 WSMCool Source N/A N/A N/A N/A N/A N/A
37 CustomProgram N/A N/A N/A N/A N/A N/A
AO — Analog Output
AOSS — Adaptive Optimal Start/Stop
CV — Constant Volume
DO — DigitalOutput
IAQ — IndoorAirQuality
N/A — NotAvailable
NTFC — Nighttime FreeCooling
VAV — VariableAir Volume
WSM — Water System Manager
CLEAR
EXPN/EDIT