
u
To do this:
Turn on display of graph controller arrows during graphing
Turn off display of graph controller arrows during graphing
• The above is the same as the
kGeometry Format Dialog Box
Use the Geometry Format dialog box to configure settings for the Geometry application.
Tip
•The information that appears in the preview area at the bottom of the dialog box shows a preview of the Geometry application window, based on the settings configured in upper half of the dialog box.
uNumber Format
To specify this type of numeric value display format on | Select this setting: | |
the Geometry window: | ||
| ||
|
| |
Auto exponential display for values less than | Normal 1 | |
1010 or greater (when you are in the Decimal mode) | ||
| ||
|
| |
Auto exponential display for values less than | Normal 2 | |
1010 or greater (when you are in the Decimal mode) | ||
| ||
|
| |
Fixed number of decimal places | Fix 0 – 9 | |
|
| |
Fixed number of significant digits | Sci 0 – 9 | |
|
|
• The initial default [Number Format] setting is Fix 2.
20060301