Matrix and Vector Calculations
kRaising a Matrix to a Specific Power
Example: | To raise |
| 1 | 2 |
| to the power of 3 |
| 3 | 4 |
| |||
|
|
|
|
Use the procedures described under “Matrix Addition, Subtraction, Multiplication, and Division” on page
The following are the screens that would be produced by each input method.
Input using the 9keyboard | Input using the )keyboard |
Tip
•You can perform matrix calculations using the commands of the
•You can raise only a square matrix to a specific power. An error occurs when you try to raise a
Use the procedure in this section when you want to use a matrix to assign various different values to multiple variables.
Syntax: Matrix with Numbers → Matrix with Variables
(The matrix can be one line with multiple columns, or multiple lines with one column.)
Example: Assign the values 10, 20, and 30, to variables x, y, and z respectively
uClassPad Operation
(1)Perform the key operation below in the Main application work area.
)s7bacca7daeW 7XcY7Z
(2)w
Tip
•You can also perform this operation using a list. For details see “Using a List to Assign Different Values to Multiple Variables” on page
20060301