
Graphing
kGraph Parameter Settings (page
•[XList] specifies the list that contains the data to be plotted.
•[Freq] specifies the frequency of the data.
•If [Show Outliers] box is checked, “outlier” square symbols are shown instead of “whisker” lines where a data value is relatively large or small compared to the other data values.
Figure. Do not show Outliers | Figure. Show Outliers |
Tip
•When specifying a list of frequency values, make sure that the list contains positive integers only.
The normal distribution curve is graphed using the following normal distribution function.
y = | 1 | e |
| ||
– 2σn | 2 | ||||
|
|
|
|
kGraph Parameter Settings (page
•[XList] specifies the list that contains the data to be graphed.
•[Freq] specifies the frequency of the data.
20060301