Recursive and Explicit Form of a Sequence
(7) Configure View Window settings as shown below.
xmin = 0 | xmax = 6 | xscale = 1 | xdot: (Specify auto setting.) |
ymin = | ymax = 65 | yscale = 5 | ydot: (Specify auto setting.) |
(8)After everything is the way you want, tap [OK].
(9)Tap the down arrow button next to #, and then select +to create the table.
(10)Perform one of the following steps to draw the type of graph you want.
• To draw a connect type graph, tap $.
• To draw a plot type graph, tap !.
In the above example, “4 Cells” is selected for the [Cell Width Pattern] setting of the Graph Format dialog box (page
20060301