Configuring Communication Parameters
17-3 Configuring Communication Parameters
Before trying to transfer data with the ClassPad, you should perform the procedures described in this section to configure its data communication parameters.
uClassPad Operation
(1)On the application menu, tap B.
•This starts the Communication application and displays a window that shows its current communication parameter settings.
(2)Tap [Setup] and then [Open Setup Menu].
•This displays a dialog box for changing communication parameters, like the one shown below.
(3)Configure the communication parameter settings as described below.
• Items marked with an asterisk (*) are initial defaults.
uScreen Copy To Specify “Outer Device”.
uCable Type
When connecting to this type of device: | Select this setting: |
Another ClassPad unit or a Data Analyzer | 3pin cable |
A computer’s USB port | USB cable* |
|
|
20060301