
Drawing a Cobweb Diagram
6-5 Drawing a Cobweb Diagram
You can use the procedure described here to input a sequence and draw a cobweb diagram. Example: To graph an+1 = a2n2 – 1 , a1 = 0.5
uClassPad Operation
(1)Start up the Sequence Editor.
•If you have another application running, tap mand then H.
•If you have the Sequence application running, tap Oand then [Sequence Editor].
(2)Tap the [Recursive] tab.
(3)Specify the recursion type by tapping [Type] and then [an+1Type a1].
(4)Input the recursion expression.
•Tap the input box to the right of an+1:, and then use the procedures under
(5)Input the initial value.
0.5E
(6)Tap Oand then [View Window].
•This displays a dialog box for configuring View Window settings.
(7)Configure View Window settings as shown below.
xmin = | xmax = 3 | xscale = 1 | xdot: (Specify auto setting.) |
ymin = | ymax = 1 | yscale = 1 | ydot: (Specify auto setting.) |
(8)After everything is the way you want, tap [OK].
(9)Tap .
(10)Press Efor each step of the web.
Tip
•On the cobweb graph window, you can draw the cobweb diagram again by selecting Trace on the Analysis menu.
20060301