Graphing
When you suspect that the data contains extreme values, you should use the
uClassPad Operation
Start the graphing operation from the Statistics application’s Graph window or List window.
From the Graph window
Tap [Calc] [MedMed Line] [OK] [OK] ".
From the List window
Tap [SetGraph][Setting...], or G.
On the Set StatGraphs dialog box that appears, configure a StatGraph setup with the setting shown below, and then tap [Set].
Type: MedMed
Tap yto draw the graph.
The following is the
a :
b :
Tip
•When specifying a list of frequency values, make sure that the list contains positive integers only.
20060301