Storing Functions
kReturning Sheets to Their Default Names
The procedure below returns the sheet names to their initial default names (Sheet 1 through Sheet 5).
uClassPad Operation
(1)Tap the Graph Editor window to make it active.
(2)Tap a, [Sheet], and then [Default Name].
• This returns the currently active sheet to its default name.
kInitializing a Sheet
The following procedure initializes a sheet, which clears all of its functions and renames the sheet to its default name.
uClassPad Operation
(1)If the sheet you want to initialize is not active, tap its tab.
(2)Tap a, [Sheet], and then [Clear Sheet].
(3)In response to the confirmation message that appears, tap [OK] to initialize the sheet or [Cancel] to cancel the operation.
•For details about editing and deleting individual functions, see “Editing Stored Functions” on page
•You can delete all expressions on all of the sheets by tapping [Edit] and then [Clear All]. For more information, see “Deleting All Graph Editor Expressions” on page
When storing a Graph & Table application function, the first thing you need to do is specify the function type. The following table lists all of the function types that you can select.
|
|
y = | Rectangular coordinate expression |
r = | Polar coordinate expression |
xt/yt = | Parametric expressions |
x = | X = expression |
y > |
|
y < |
|
y ≤ |
|
y ≥ | Inequality |
x > | |
x < |
|
x ≤ |
|
x ≥ |
|
ya | Two functions in a list with shading |
| between them |
20060301