
Creating a New Program
Running a ProgramThe following procedure shows how to run the sample program we input under “Creating and Saving a Program” on page
uClassPad Operation
(1)Display the Program Loader window.
•From the Program Editor window, tap ), or tap Oand then [Program Loader].
•From another application, tap mand then p.
•This causes the Program Loader window to appear.
(2)Tap the [Folder] down arrow button, and then select the name of the folder you want.
(3)Tap the [Name] down arrow button, and then tap the name of the file you input in step (3) of the example on page
(4)Tap p, or tap [Run] and then [Run Program] to run the program.
(5)Input a side length of 7 and tap [OK] twice.
7 [OK] [OK]
(6)Tap the Program Loader window and repeat steps (4) and (5) for sides of length 10 and 15.
p10 [OK] [OK] p15 [OK] [OK]
Tip
•In step (4) of the above procedure, you can specify parameters before running the program.
For more information, see “Configuring Parameter Variables and Inputting Their Values” on page
•You can run a program from the Main application or the eActivity application. For more information, see
20060301