Assigning Shift Mode Key Operations to Hard Keys
•To assign the Cut, Copy, or Paste operation, tap the applicable button on the dialog box.
• To clear the current assignment from the hard key, tap [Clear Assignment].
(6)After all the settings are the way you want, tap [OK] to apply them and close the Shift Key Assign dialog box.
Example : To configure a shift operation that inserts the variable assignment character “v ” automatically when zand =key are pressed.
uClassPad Operation
(1)Perform steps (1) through (3) of the above operation to enable shift key assignment.
(2)Tap the down arrow button and select [=].
(3) k9V
(4)Tap inside the box next to the [Set] button. Tap [in the soft keyboard.
(5)Tap the [OK] button.
•Now When you press zand then =, the “v ” will appear.
uUsing the Shift Mode with a Cursor Key
When the shift function of the zkey is enabled, you can use it with cursor key.
•Shift f: Moves the cursor to the beginning of the current line
•Shift c: Moves the cursor to the end of the current line
•Shift d or e: Select the expression in the current line to the right or left of the cursor
20060301