1-8-7

Using the Variable Manager

Variable Operations

This section explains the various operations you can perform on the Variable Manager variables.

kOpening a Folder

Perform the steps below to open a folder and display the variables contained inside it.

uClassPad Operation

(1)Start up the Variable Manager and display the folder list.

(2)Tap the name of the folder you want to open so it is highlighted, and then tap it again.

•This opens the folder and displays a variable list showing its contents.

(3)To return to the folder list, tap [Close].

kOpening the “library” Folder

Note that the procedure you need to use to open the “library” folder is different from the procedure for opening other folders.

uClassPad Operation

(1)Start up the Variable Manager and display the folder list.

(2)Tap [View] and then [“library” Folder].

•This opens the “library” folder and displays a variable list showing its contents.

(3)To return to the folder list, tap [Close].

Tip

•You can also open the “library” folder (by tapping [View] and then [“library” Folder]) while the variable list is on the display.

kDisplaying a List of a Particular Type of Variable

You can use the variable list to produce a list of a particular type of variable only.

uClassPad Operation

(1)In the Variable Manager, open any folder to display a variable list of its contents.

(2)Tap [View] and then [Variable Type].

•This displays the Variable Type dialog box for specifying the variable data type.

20060301