
Using Stat Editor
uTo jump to the first or last line of a list
(1)Select any cell in the list.
(2)On the menu bar, tap [Edit].
(3)Select one of the following commands to perform the type of operation you want.
To do this: | Select this command: |
Move the cursor to line 1 of the list | Jump to Top |
Move the cursor to the line following the last line that contains data
• If your list contains 14 entries, then the cursor will move Jump to Bottom to the 15 entry.
•If your list contains 9999 entries (the maximum allowed), then the cursor will move to line 9999.
kOpening a List
Lists are saved in files under their list (variable) names. This means you can close a list and
There are two different methods you can use to open a list: using the [Open List] command and inputting the name of the list in the list name cell of a column.
uTo open an existing list using the “Open List” command
(1)On the Stat Editor window, select any cell in the column where you want the list you will open to appear.
(2)On the menu bar, tap [Edit] and then [Open List].
(3)In the “list=” box that appears, enter the variable name of the list you want to open, and then tap w.
Tip
•If you enter a variable name that does not match the names of any of the existing lists in step (3), a new list is created using that name.
uTo open an existing list by inputting its name in the list name cell
(1)On the Stat Editor window, select the list name cell of the column where you want the list you will open to appear.
(2)Enter the variable name of the list you want to open.
(3)Tap wto open the list.
20060301