Graphing
7-5 Graphing Paired-Variable Statistical Data
With
Before trying to draw any of the graphs described below, configure the graph setup using the procedures under “Configuring StatGraph Setups” on page
Use the procedure below to plot a scatter diagram and then connect the dots to produce an xy line graph.
Example: Input the
list1 = 0.5, 1.2, 2.4, 4.0, 5.2 list2 =
uClassPad Operation
(1)mI
(2)Input the data shown above.
(3)Tap [SetGraph] and then [Setting…], or tap G.
(4)On the Set StatGraphs dialog box that appears, configure a StatGraph setup with the scatter plot settings shown below, and then tap [Set].
Draw: On
Type: Scatter
XList: list1
YList: list2
(5)Tap yto plot the scatter plot.
(6)Tap the List window to make it active.
(7)Tap [SetGraph] and then [Setting…], or tap G.
(8)On the Set StatGraphs dialog box that appears, configure a StatGraph setup with the xy line graph settings shown below, and then tap [Set].
Draw: On
Type: xyLine
XList: list1
YList: list2
20060301