8-1-6

Geometry Application Overview

kToolbar Button

The operation described below is available from the toolbar only.

To do this:

Do this:

Activate Toggle Select (page 8-3-2)

Tap iand then tap a figure.

 

 

Tapping a button highlights it, indicating that the button’s function is turned on.

kAbout the Measurement Box

Tapping the ubutton to the right of the toolbar takes you to the measurement box. Tap tto return to the normal toolbar.

Normal toolbar

Measurement box

For more information about the measurement box, see “Using the Measurement Box” on page 8-3-6.

kAbout the Geometry Format Dialog Box

Settings for the Geometry application can be configured on the Geometry Format dialog box which appears when you tap Oand then [Geometry Format]. See “1-9 Configuring Application Format Settings” for more information.

20060301