14-7-3

Differential Equation Graph Window Operations

uTo configure new initial conditions on the Differential Equation Graph window

Example: After drawing the slope field of a first order differential equation, to configure initial condition settings on the Differential Equation Graph window

(1)Perform the operation under “Inputting a First Order Differential Equation and Drawing a Slope Field” on page 14-2-1.

•Performing all of the steps will produce a slope field like the one shown below to appear on the Differential Equation Graph window.

(2)Tap [Analysis] - [Modify] or the toolbar Jbutton.

•This will cause the Jbutton to become highlighted.

(3)On the Differential Equation Graph window, tap the coordinates that you want to specify as the new initial condition.

•This will set the coordinates as the new initial condition and draw a solution curve.

20060301