Drawing Figures
uTo attach an angle measurement to a figure
Example: To attach the measurement of angle A in the triangle ABC
(1)Draw the triangle.
(2)Tap G. Next, tap side AB and then side AC to select them.
(3)Tap [Draw] and then [Attached Angle].
• This attaches the angle measurement to the figure.
Tip
•The two sides of a figure actually forms four angles, numbered 1 through 4 in the illustration shown here. After attaching an angle measurement using the [Attached Angle] command, you can drag it to the position of any one of the other three angles as shown in the examples below.
2
1
3
4
20060301