3-4-13

Using Table & Graph

(3)Tap 6to display the View Window dialog box.

(4)Specify the x-values for the summary table by specifying values for the [xmin] and [xmax] settings.

•For this example, we will specify xmin = –0.5 and xmax = 2.

(5)Tap the [OK] button to close the View Window dialog box.

(6)Tap 4.

•This starts the summary table generation using the range you specified in step (4), and displays the result on the Table window.

Important!

•A monotone increasing function or other special function may not be solvable by the

ClassPad’s internal summary table calculation. If this happens, use the procedure under “Generating a Summary Table by Specifying All of the Values for x” (page 3-4-14) to calculate the elements of the summary table. In addition to View Window parameters, you

can also select previously stored list data to specify the range of a summary table. On the Graph Format dialog box (displayed using the Omenu), select the [Special] tab, tap the “Summary Table” down arrow button, and then select the name of the list you want to use on the menu that appears.

20060301