eActivity Application Overview
kOther Buttons
The operations described below are available from the toolbar only.
There are no corresponding menu commands for these buttons.
To do this: | Tap this button: | |
Open the Files dialog box (page | { | |
|
| |
Toggles a calculation result between standard (fractional result) and | u | |
decimal (approximate result) | ||
| ||
Recalculate the equation just for the current line where the cursor is | D | |
currently located | ||
| ||
Bold the text that is currently selected | B | |
|
| |
Converts a text row to a calculation row | u | |
|
| |
Converts a calculation row to a text row | < | |
|
|
The information that appears in the eActivity application status bar is same as the Main application status bar information. See “Using Main Application Modes” on page
In the eActivity application, the cursor key, Kkey, and Ekey operate differently than they do in other modes.
Cursor Key
•The cursor key moves the cursor around the eActivity window.
•Though you can always move the cursor up and down, you may not always be able to move it left and right. The left and right cursor key operations move the cursor left and right in the current row, but for the most part they cannot be used to move the cursor between rows of different types.
•Up and down cursor operations move the cursor between rows, regardless of type.
KKey
• Pressing the Kkey deletes the character to the left of the current cursor position.
EKey
•Pressing the Ekey while the cursor is in a text row inserts a carriage return and adds a new line.
•Pressing the Ekey while the cursor is in a calculation row
•Pressing the Ekey while the cursor is in a Geometry Link row
20060301