MV 4440_Ciprico Inc. 5-13
MediaVault 4440 User Manual Operations
Changing Modes When Hot-Plugging vPODs
In some cases the MV 4440 cannot be power-cycled, and the mode must
be changed while the vPOD is hot-plugged. Perform the following
procedure.
1. Select a mode.
2. Set the mode number with the MODE SELECT switch located on the
vPOD. See Figure 5-3. Use a pointed object (such as pen tip) to press
the desired button at the MODE SELECT switch.
3. Insert the vPOD into the MV 4440.
4. As soon as the OK LED illuminates, press and hold the MODE SET
button (see a description of the button on page 5-14).
5. Keep holding down the MODE SET button until two beeps are heard.
6. Release the MODE SET button.