Operations | MediaVault 4440 User Manual |
TABLE 5-2. Front Components of the MV 4440.
Component | Description | |
|
| |
Power LED | “On” indicates that power is flowing to the vPOD. | |
|
| |
| “On” indicates that the vPOD is operating in | |
RAID 6 LED | See the “Mode (RAID Type) Functions” section for additional RAID level | |
information. When this indicator is off, the vPOD is operating in RAID 0 | ||
| ||
| (performance) mode. | |
|
| |
Active LED | An active LED will be on when data is being transmitted over the LC Duplex optical | |
cables. The LED is not on when there is no data activity. | ||
| ||
| “On” indicates that the vPOD is operating at its optimum 4Gbit Fibre Channel speed. | |
4 Gb LED | When this LED and the 2Gbit speed LED are off, the vPOD is operating at less than | |
| 2Gbit speed. | |
| “On” indicates that the vPOD is operating in 2Gbit speed. | |
2 Gb LED | When this LED and the 4Gbit speed LED are off, the vPOD is operating at less than | |
| ||
| 2Gbit speed. | |
|
| |
| “On” indicates that at least one disk drive is marked down and vPOD will need | |
Service LED | service. There is one more drive left for redundancy. This LED blinks if the “Urgent | |
| Service” LED is also on. | |
Urgent Service LED | “On” indicates that at least two disk drives are marked down and need immediate | |
service. No more drives remain for redundancy. If another drive fails data will be lost. | ||
|
MV 4440_Ciprico Inc. |
