Ciprico 4400 user manual Maintenance

Maintenance MediaVault 4440 User Manual

NOTE: The Activity LED on the back of the vPOD goes off, which indicates that it is safe to remove the vPOD.

3.Install a replacement vPOD in the MV 4440. Insert the required cables. Tighten the thumbscrews.

4.Set the MODE SELECT switch of the replacement vPOD to the previously used setting, in order to perform operations such as reconstruction. However, if the vPOD will be hot-swapped frequently and there is no need to change the RAID mode, the MODE SELECT switch can be set to “14”.

8-4 MV 4440_Ciprico Inc.