Cisco Systems 2600 manual Modules, Interface Cards, and Memory, CF1

Chapter 1 Overview of Cisco 2600 Series Routers

Modules, Interface Cards, and Memory

Figure 1-10 Cisco 2691—Rear-Panel LEDs

TD

RD

LP

AL

CD

SEE

MANUAL

DSU

BEFORE

INSTALLATION

TD

RD

LP

AL

56K

100

ACT

SEE

CD

Mbps

MANUAL

DSU

LINK

ACT

BEFORE

INSTALLATION

CF1

56K

100

Mbps

FAST

ETHERNET

LINK

SEE

0/1

FAST

ETHERNET 0/0

MANUAL

BEFORE

INSTALLATION

FastEthernet 0/1		CF1		CISCO2691
		LED			AUX
FastEthernet 0/0				CONSOLE
		ACT LED	Compact
			Flash	Console
		100 Mbps LED
			slot	port
		LINK LED
					Auxiliary
					port
Table 1-5 Cisco 2691—Rear-Panel LEDs
LED	Description
LINK	On when a link has been established with the hub or switch at the
	other end of the cable.
ACT	On when packets are being transmitted or received on the Ethernet
	interface.
100 Mbps	On when the speed of the interface is 100 Mbps. Off when the speed
	of the interface is 10 Mbps.
CF1	On when flash memory is being accessed—either READ or WRITE.

72011

Modules, Interface Cards, and Memory

The latest information on network modules, WAN interface cards (WICs), voice interface cards (VICs), advanced integration modules (AIMs), and memory is available online and on the documentation CD-ROM.

•For information on installing network modules, refer to the following documents:

–Quick Start Guide: Network Modules for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers

–Cisco Network Modules Hardware Installation Guide

•For information on installing WICs and VICs, refer to the following documents:

–Quick Start Guide: Interface Cards for Cisco 1600, 1700, 2600, 3600, and 3700 Series

–Cisco Interface Cards Installation Guide

Cisco 2600 Series Routers Hardware Installation Guide

1-8 OL-2171-06