Cisco Systems 2600 manual Serial DTE or DCE Devices

Contents

General Site Requirements		2-3
Power Supply Considerations				2-3
Site Environment	2-3
Site Configuration 2-4
Equipment Racks	2-4
Installation Checklist	2-4
Creating a Site Log	2-5
Inspecting the Router	2-6
Tools and Equipment for Installation and Maintenance 2-6
Console and Auxiliary Port Considerations 2-7
Console Port Connections			2-7
Auxiliary Port Connections			2-8
Preparing to Connect to a Network				2-8
Ethernet Connections		2-9
Token Ring Connections			2-9

			Serial Connections		2-10
			Configuring Serial Connections					2-10
			Serial DTE or DCE Devices 2-10
			Signaling Standards Supported					2-11
			Distance Limitations			2-11
			Asynchronous/Synchronous Serial Module Baud Rates 2-12
			ISDN BRI Connections			2-12
			56-K/Switched-56-kbps DSU/CSU Connections 2-13
			Installing the Router
C H A P T E R 3				3-1
			Installing Modules, Interface Cards, and Power Supplies						3-2
			Setting Up the Chassis		3-3
			Setting the Chassis on a Desktop				3-3
			Mounting the Chassis in a Rack				3-4
			Attaching the Brackets to Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series
			Routers	3-5
			Attaching the Brackets to a Router of 2-RU Height						3-9
			Installing the Router in a Rack					3-10
			Mounting the Chassis on the Wall				3-11
			Attaching Rubber Feet to the Router 3-11
			Attaching Wall-Mount Brackets to the Router 3-11
			Mounting the Router on the Wall					3-12
			Installing the Chassis Ground Connection					3-13
			Power Connections	3-15
		Cisco 2600 Series Routers Hardware Installation Guide
	iv								OL-2171-06