Cisco Systems 2600 manual Ring terminal

Chapter 3 Installing the Router

Installing the Chassis Ground Connection

To connect the chassis to a reliable earth ground, perform the following steps:

Step 1 Strip one end of the ground wire to the length required for the ground lug or terminal.

•For the NEBS ground lug—approximately 0.75 in. (20 mm)

•For user-provided ring terminal—as required

Step 2 Crimp the ground wire to the ground lug or ring terminal, using a crimp tool of the appropriate size.

Step 3 Attach the ground lug or ring terminal to the chassis as shown in Figure 3-18, Figure 3-19, Figure 3-20, or Figure 3-21. For the ground lug, use the two screws with captive locking washers provided. For a ring terminal, use one of the screws provided. Use a number 2 Phillips screwdriver, and tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).

Step 4 Connect the other end of the ground wire to a suitable grounding point at your site.

Figure 3-18 NEBS-Compliant Chassis Ground Connection Using Ground Lug, 1-RU Chassis

SERIAL 1							Cisco 2611
SERIAL 0					SERIAL 1
CONN	WIC				SERIAL 0
	CONN 2A/S		CONN			CONN	WIC
SEE MANUAL BEFORE INSTALLATION			SEE MANUAL BEFORE				2T
W1					INSTALLATION
							W0
LINK ETHERNET 1	ACT	LINK	ETHERNET 0	ACT CONSOLE		AUX

Ground lug

100-240V– 1A 50/60 Hz 47 W

36454

Figure 3-19 Chassis Ground Connection Using Ring Terminal, 1-RU Chassis

	SERIAL 1				Cisco 2611	100-240V– 1A
CONN	WIC			SERIAL 1
				SERIAL 0		50/60 Hz	47 W
	SERIAL 0
	CONN 2A/S	CONN		CONN	WIC
W1	SEE MANUAL BEFORE INSTALLATION		SEE MANUAL BEFORE		2T
				INSTALLATION
					W0

LINK ETHERNET 1 ACT LINK ETHERNET 0 ACT CONSOLE AUX

Ring terminal

Figure 3-20 NEBS-Compliant Chassis Ground Connection Using Ground Lug, Cisco 2691

103057

ASYNC

ASYNC 24-31

ASYNC 16-23

ASYNC 8-15

ASYNC 0-7

EN

Ground lug attachment

TD	RD	LP	AL		CD
	SEE
	MANUAL BEFORE			INSTALLATION	DSU
					56K

ACT
100 Mbps
LINK			ACT		CF1
FAST	ETHERNET 0/1		100	Mbps
		FAST	LINK
			ETHERNET 0/0

TD	RD	LP	AL
	SEE		CD
	MANUAL BEFORE
			INSTALLATION

DSU 56K

SEE MANUAL BEFORE INSTALLATION

CISCO2691 CONSOLE AUX

72228

Cisco 2600 Series Routers Hardware Installation Guide

3-14 OL-2171-06