Cisco Systems 2600 manual Installing the Router in a Rack, V0 EN

Chapter 3 Installing the Router

Setting Up the Chassis

Figure 3-14 Bracket Installation—Center Mounting with Front Panel Forward

LEFT 23" ETSI, NEBS LEFT

SESERIE	S
RIES

Left bracket

for 23-inch rack

Left (narrow) bracket

for 19-inch rack

Use two screws on each side.

82689

RIGHT	ETSI, NEBS	RIGHT
	23"

Right (wide) bracket for 19-inch rack

Right bracket

for 23-inch rack

Figure 3-15 Bracket Installation—Center Mounting with Rear Panel Forward

RIGHT RIGHT

NM-HDV

BANK 4	BANK 3			2MFT-E1
				VWIC
		BANK 2	BANK 1	BANK 0

Right bracket

for 23-inch rack

Right (wide) bracket

for 19-inch rack

ALLP

CD CTRLR E2

CTRLR E1

V0 EN

SEE MANUAL BEFORE INSTALLATION

DSU 56K

SEE MANUAL BEFORE INSTALLATION

DSU 56K

SEE MANUAL BEFORE INSTALLATION

82690

LEFT LEFT

Left (narrow) bracket

Use two screws on each side.

for 19-inch rack

Left bracket

for 23-inch rack

Installing the Router in a Rack

After the brackets are secured to the chassis, you can mount the chassis in a rack. Use the illustrations in the previous section as a guide to attaching the brackets to the rack.

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

•This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

•When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

•If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006

Cisco 2600 Series Routers Hardware Installation Guide

3-10 OL-2171-06