Transmit, DBm Wavelength nm | Cisco Systems 3120 guide

Appendix B Connector and Cable Specifications

Cable and Adapter Specifications

Table B-1	X2 Transceiver Port Cabling Specifications (continued)

					Modal
X2 Product		Wavelength		Core Size	Bandwidth	Maximum Cabling
Number		(nm)	Cable Type	(microns)	(MHz/km)	Distance

X2-10GB-CX4		—	InfiniBand	—	—	49 feet (15 m)
			(copper)

X2-10GB-LRM		1310	MMF	62.5	160	220 m (722 feet)
				62.5	200	220 m (722 feet)
				50.0	400	220 m (722 feet)
				50.0	500	220 m (722 feet)
				50.0	1500	220 m (722 feet)

1. Mode conditioning patch cord is recommended for MMF applications.

Table B-2	X2 Transceiver Optical Send and Receive Specifications

					Transmit and
X2 Product			Transmit Power	Receive Power	Receive
Number		Transceiver Type	(dBm)	(dBm)	Wavelength (nm)

X2-10GB-SR		10GBASE-SR,	–11(max)	–1.0 (max)	840 to 860
		850-nm MMF	–7.3 (min)	–9.9 (min)

X2-10GB-LX4		10GBASE-LX4	–0.5 per lane (max)	–0.5 (max)	Four lanes; overall
		WWWDM	—	–14.4 per lane	range: 1269 to 1356
		1300-nm MMF

X2-10GB-LRM		10GBASE-LR,	0.5 (max)	0.5 (max)	1260 to 1355
		1310-nm MMF	–6.5 (min)	–8.4 (min average)
			–6.5 (min)	–8.4 (min average)
				and –6.4 (min in
				OMA)

1.The launch power shall be the lesser of the Class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by IEC 60825-1: 2001.

Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide

	OL-12246-01	B-5

Image 59

Cisco Systems 3120 manual X2 Product Transmit Power Receive Power Number, DBm Wavelength nm

Contents

Americas Headquarters MarchPage N T E N T S Setup Accessing the CLI Through the Console Port OL-12246-01 Organization AudiencePurpose Related Publications Conventions Preface OL-12246-01 Product Overview Switch Module Features Overview Port Description UID 1 LED Switch Module Console Port Other Features LRM 10/100/1000 PortsGigabit Ethernet Module Slots Cisco TwinGig Converter Module Color System Status LEDsSystem LED Stack LED RJ-45 Uplink Port LEDs Stack Master LEDStack Member LED UID and Health LEDs Gigabit Ethernet Module Slot Port LEDs X2 Module Installed Only the CBS3120X Switch StackWise Plus Ports Power ConnectorsManagement Options Device Manager Using the Device Manager Network Configurations Using the Command-Line Interface Preparing for Installation Switch Installation Safety Warnings Installation Guidelines Verifying Package Contents Rear View of the Blade Enclosure HP c-Class BladeSystem Enclosure Architecture Statement Installing the Switch Module in the Blade Enclosure Open the Release Latch Switch Module IP Addresses Switch Installation Onboard Administrator Interconnect Bay Summary Window Express Setup Advanced Settings Table Using Express Setup Enter switch 1 priority Setting the Installed Switch Module As the Stack Master Refreshing the PC IP Address Planning and Creating a Switch Stack Stack Cabling Configurations 250304 Connecting to the StackWise Plus Ports Installing Devices in the 10-Gigabit Ethernet Slots Installing a Transceiver or Converter Module Removing a Module 12 Installing X2 Transceiver Modules Installing an SFP Module Installing SFP Modules Removing an SFP Module 14 Converter Module with SFP Modules Installed 15 Connecting to an Ethernet Port Connecting to the 10/100/1000 Ports Planning 10/100/1000 Ethernet Port Connections Device Crossover Cable Where to Go Next Switch Installation Where to Go Next Verify the Switch Module Post Results Diagnosing Problems Ethernet and Fiber Cables Look at the Switch Module LEDsConfirm the Switch Module Connections Bad or Damaged Cable Spanning Tree Loops SFP Module Port IssuesPort and Interface Settings Ping the End Device Cabling Distance Verify the Switch Module PerformanceSpeed, Duplex, and Autonegotiation Autonegotiation and Network-Interface Cards Replacing a Failed Stack Member Clearing the Switch Module IP Address and Configuration 250310 Locating the Switch Module Serial Number OL-12246-01 Environmental Ranges Physical Dimensions OL-12246-01 Connector Specifications Connector and Cable Specifications Connecting to 1000BASE-T Devices Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices Cisco TwinGig Converter Module Ports Gigabit Ethernet Module Interfaces Microns MHz/km Distance Cable and Adapter SpecificationsGigabit Ethernet X2 Transceiver Module Cable Specifications Console Port DBm Wavelength nm X2 Product Transmit Power Receive Power NumberTransmit GLC-SX-MM SFP Module Cable SpecificationsTwo Twisted-Pair Cable Pinouts 1000BASE-SX TP3 Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports Device Switch Console RJ-45-to-DB-9 Port DTEIdentifying a Crossover Cable Console Port Adapter Pinouts Switch Console RJ-45-to-DB-25 Port DTE OL-12246-01 Connecting to the Console Port Accessing the CLI Through the Console Port OL-12246-01 Figure C-1 Connecting through the Switch Module Console Port Completing the Initial Configuration To configure Snmp now, enter yes These choices appear CLI Numerics IN-2 Post UID IN-4 LED IN-5 IN-6