Cable and Adapter Specifications, Console Port | Cisco Systems 3120

Appendix B Connector and Cable Specifications

Cable and Adapter Specifications

Console Port

The console port uses an 8-pin RJ-45 connector, which is described in Table B-4and Table B-5. The supplied RJ-45-to-DB-9 adapter cable is used to connect the console port of the switch module to a console PC. You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch module console port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see Table B-4and Table B-5.

Cable and Adapter Specifications

These sections describe the cables and adapters used with the switch module.

•10-Gigabit Ethernet X2 Transceiver Module Cable Specifications, page B-4

•SFP Module Cable Specifications, page B-6

•Two Twisted-Pair Cable Pinouts, page B-6

•Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports, page B-7

•Identifying a Crossover Cable, page B-8

•Console Port Adapter Pinouts, page B-8

10-Gigabit Ethernet X2 Transceiver Module Cable Specifications

Table B-1lists the port cabling specifications for the 10-Gigabit Ethernet X2 transceiver modules. Each port must match the wave-length specifications on the other end of the cable, and for reliable communications, the cable must not exceed the stipulated cable length. Table B-2lists the transceiver optical send and receive specifications.

Table B-1	X2 Transceiver Port Cabling Specifications

					Modal
X2 Product		Wavelength		Core Size	Bandwidth	Maximum Cabling
Number		(nm)	Cable Type	(microns)	(MHz/km)	Distance

X2-10GB-SR		850	MMF	62.5	160	85 feet (26 m)
				62.5	200	108 feet (33 m)
				50.0	400	217 feet (66 m)
				50.0	500	269 feet (82 m)
				50.0	2000	984 feet (300 m)

X2-10GB-LX4		1310	MMF1	62.5	500	984 feet (300 m)
				50.0	400	787 feet (240 m)
				50.0	500	984 feet (300 m)

Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide

	B-4	OL-12246-01

Image 58

Cisco Systems 3120 manual Cable and Adapter Specifications, Console Port, Microns MHz/km Distance, Mmf

Contents

March Americas HeadquartersPage N T E N T S Setup Accessing the CLI Through the Console Port OL-12246-01 Purpose AudienceOrganization Conventions Related Publications Preface OL-12246-01 Switch Module Features Overview Product Overview UID 1 LED Port Description Other Features Switch Module Console Port Cisco TwinGig Converter Module 10/100/1000 PortsGigabit Ethernet Module Slots LRM Stack LED LEDsSystem LED Color System Status UID and Health LEDs Stack Master LEDStack Member LED RJ-45 Uplink Port LEDs X2 Module Installed Only the CBS3120X Switch Gigabit Ethernet Module Slot Port LEDs Management Options Power ConnectorsStackWise Plus Ports Using the Device Manager Device Manager Using the Command-Line Interface Network Configurations Switch Installation Preparing for Installation Safety Warnings Installation Guidelines Verifying Package Contents HP c-Class BladeSystem Enclosure Architecture Rear View of the Blade Enclosure Installing the Switch Module in the Blade Enclosure Statement Open the Release Latch Switch Module IP Addresses Switch Installation Onboard Administrator Interconnect Bay Summary Window Using Express Setup Express Setup Advanced Settings Table Setting the Installed Switch Module As the Stack Master Enter switch 1 priority Planning and Creating a Switch Stack Refreshing the PC IP Address Stack Cabling Configurations 250304 Connecting to the StackWise Plus Ports Installing Devices in the 10-Gigabit Ethernet Slots Installing a Transceiver or Converter Module 12 Installing X2 Transceiver Modules Removing a Module Installing SFP Modules Installing an SFP Module 14 Converter Module with SFP Modules Installed Removing an SFP Module Connecting to the 10/100/1000 Ports 15 Connecting to an Ethernet Port Planning 10/100/1000 Ethernet Port Connections Where to Go Next Device Crossover Cable Switch Installation Where to Go Next Diagnosing Problems Verify the Switch Module Post Results Bad or Damaged Cable Look at the Switch Module LEDsConfirm the Switch Module Connections Ethernet and Fiber Cables Ping the End Device SFP Module Port IssuesPort and Interface Settings Spanning Tree Loops Autonegotiation and Network-Interface Cards Verify the Switch Module PerformanceSpeed, Duplex, and Autonegotiation Cabling Distance Clearing the Switch Module IP Address and Configuration Replacing a Failed Stack Member Locating the Switch Module Serial Number 250310 OL-12246-01 Physical Dimensions Environmental Ranges OL-12246-01 Connector and Cable Specifications Connector Specifications Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices Connecting to 1000BASE-T Devices Gigabit Ethernet Module Interfaces Cisco TwinGig Converter Module Ports Console Port Cable and Adapter SpecificationsGigabit Ethernet X2 Transceiver Module Cable Specifications Microns MHz/km Distance Transmit X2 Product Transmit Power Receive Power NumberDBm Wavelength nm 1000BASE-SX SFP Module Cable SpecificationsTwo Twisted-Pair Cable Pinouts GLC-SX-MM Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports TP3 Console Port Adapter Pinouts Switch Console RJ-45-to-DB-9 Port DTEIdentifying a Crossover Cable Device Switch Console RJ-45-to-DB-25 Port DTE OL-12246-01 Accessing the CLI Through the Console Port Connecting to the Console Port OL-12246-01 Figure C-1 Connecting through the Switch Module Console Port Completing the Initial Configuration To configure Snmp now, enter yes These choices appear Numerics CLI IN-2 UID Post LED IN-4 IN-5 IN-6