A P P E N D I X C

Configuring the Switch with the CLI Setup

Program

This appendix provides a command-line interface (CLI) setup procedure for a standalone switch. To set up the switch by using Express Setup, see the Catalyst 3560-C and 2960-C Switch Getting Started Guide. Before connecting the switch to a power source, review the safety warnings in Chapter 2, “Switch Installation.”

Accessing the CLI Through the Console Port

You can enter Cisco IOS commands and parameters through the CLI. Use one of these options to access the CLI:

RJ-45 Console Port

USB Mini-Type B Console Port

RJ-45 Console Port

Step 1 Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. Connect the other end of the cable to the switch console port.

Step 2 Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC application such as HyperTerminal or ProcommPlus, makes communication between the switch and your PC or terminal possible.

Catalyst 3560-C and 2960-C Switch Hardware Installation Guide

 

OL-23803-02

C-1

 

Page 83
Image 83
Cisco Systems 3560-C manual Accessing the CLI Through the Console Port, RJ-45 Console Port