Cisco Systems 4500 manual System Ground Connection Guidelines, Grounding Holes

Chapter 3 Installing the Switch in a Rack

System Ground Connection Guidelines

Step 6 Connect the switch to an appropriate ground. Refer to System Ground Connection Guidelines, page 3-19. The system must have a ground connection before power is supplied to the switch.

System Ground Connection Guidelines

A grounding pad with two system (earth) grounding holes is provided in an enclosure near the left power supply on the Catalyst 4500 series switches. See Figure 3-13for the location of the grounding holes on the Catalyst 4503 switch, Figure 3-14for the location on the Catalyst 4506 switch, Figure 3-15for the location on the Catalyst 4507R switch, and Figure 3-16for the location on the Catalyst 4510R switch.

Figure 3-13 Catalyst 4503 Grounding Holes

Grounding

holes (2)

4506	WS-X4515	SUPERVISOR
			ENGINE IV

	UPLINK 1
4503	UPLINK 2
	STATUS
	LINE ACTIVE
	LINE ACTIVE
	ACTIVE

	CONSOLE	10/100
		MGT
1	UTILIZATION
	1%			FLASH
	100%	LINK	EJECT	RESET
	1
13
1
	13
13
	13

79479

	Catalyst 4500 Series Switches Installation Guide
78-14409-08		3-19