Appendix A Specifications
Catalyst 4510R Switch Specifications
Table A-4 Catalyst 4510R Switch Specifications (continued)
Item | Specification |
| |
Airflow | |
| |
Switch | Right to left |
| |
Power supply | Front to back |
| |
Power | |
| |
PoE supplied | –48 VDC |
| |
Power to Modules and Fans | 12 VDC |
| |
Power to backplane components | 3.3 VDC |
| |
Redundancy | |
| |
Supervisor engine | yes |
| |
Power supply | 1 + 1 |
| |
Note The blank line card (C4K-SLOT-CVR-E) must be installed when either of the following two situations occur:
•If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E (WS-X45-SUP6L-E) installed in slot 1 and slot 2 is empty, you must install the blank line card (C4K-SLOT-CVR-E) in slot 2 rather than a blank faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot 2 opening does not direct sufficient airflow to adequately cool the Supervisor Engine 6-E or the Supervisor Engine 6L-E.
•If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E (WS-X45-SUP6L-E) installed in slot 2 and slot 1 is empty, you must install the blank line card (C4K-SLOT-CVR-E) in slot 1 rather than a blank faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot 1 opening does not direct sufficient airflow to adequately cool the Supervisor Engine 6-E or the Supervisor Engine 6L-E.
| Catalyst 4500 Series Switches Installation Guide |
A-8 | 78-14409-08 |
