Cisco Systems 4500 manual Supervisor Engines, Vlans

Chapter 1 Product Overview

Supervisor Engines

Supervisor Engines

The following supervisor engines are available for the Catalyst 4500 series switches:

			• Supervisor Engine II (WS-X4013) (Figure 1-5)
			• Supervisor Engine II-Plus (WS-X4013+) (Figure 1-6)
			• Supervisor Engine II-Plus TS (WS-X4013+TS) (Figure 1-7)
			• Supervisor Engine II-Plus 10GE (WS-X4013+10GE) (Figure 1-8)
			• Supervisor Engine III (WS-X4014) (Figure 1-9)
			• Supervisor Engine IV (WS-X4515) (Figure 1-10)
			• Supervisor Engine V (WS-X4516) (Figure 1-11)
			• Supervisor Engine V-10GE (WS-X4516-10GE) (Figure 1-12)
	Note E-series supervisor engines may in some cases also work on Catalyst 4500 series
			systems, refer to the installation note for your supervisor engine for details.
			The Catalyst 4500 series supervisor engines have the following features:
Table 1-5		Supervisor Engine Features
Feature				Description
Data path and control				Available on all network interfaces
Management functions				Interface monitoring
				Environmental status
				SNMP and console/Telnet interface
MAC addresses supported				32,768 per system (Cisco IOS only)
VLANS				Up to 4,096 VLANs with IEEE 802.1Q VLAN tagging on all ports and
				VLAN Trunking Protocol (VTP)
Port aggregation				PAgP1 for 100-Mbps and 1000-Mbps EtherChannel
SNMP				Full implementation, including entity-MIB, all relevant standard MIBs,
				and all relevant Cisco MIBs
	Catalyst 4500 Series Switches Installation Guide
1-20				78-14409-08