Cisco Systems 7401ASR manual Installing the CompactFlash Disk, GBIC, and Port Adapter

Chapter 1 Overview and Parts Installation

Installing the CompactFlash Disk, GBIC, and Port Adapter

Table 1-2 Cisco 7401ASR Router Installation Checklist

	Verified
Task	By	Date
I/O ports and port adapter are operational (see Figure 1-2on page 1-3 for specific LED information)
Correct hardware configuration displayed after system banner appears

Installing the CompactFlash Disk, GBIC, and Port Adapter

You may have ordered a CompactFlash Disk, Gigabit Interface Converter (GBIC), and one of a variety of port adapters or service adapter with your Cisco 7401ASR router. You must install the CompactFlash Disk, GBIC, and port adapter service adapter. Use the installation instructions in the following sections to install or remove one of these optional parts:

•Installing and Removing the CompactFlash Disk, page 1-7

•Installing and Removing the Gigabit Interface Converter, page 1-8

•Installing and Removing a Port Adapter or Service Adapter, page 1-10

Installing and Removing the CompactFlash Disk

Figure 1-4 Installing and Removing the CompactFlash Disk

1 2

57604

1

CompactFlash Disk insertion

2

CompactFlash Disk removal

Insert the CompactFlash Disk in the CompactFlash Disk slot (1) with the label with the vendor name and memory size facing up. It protrudes when completely seated. To remove the CompactFlash Disk, grasp it and pull it from the slot (2).

The CompactFlash Disk is keyed to prevent it being inserted incorrectly.

Note Only the CompactFlash Disk is supported in a Cisco 7401ASR router.

Cisco 7401ASR Installation and Configuration Guide

OL-5419-01 B0 1-7