Chapter 3 Starting and Configuring

Configuring a Cisco 7401ASR Router

The following sample display includes a continuous listing of all interface configuration parameters selected for ATM, Fast Ethernet, and synchronous serial interfaces.

Configuring interface parameters:

Configuring interface ATM1/0:

Is this interface in use? [yes]:

Configure IP on this interface? [yes]:

IP address for this interface: 1.1.1.10

Number of bits in subnet field [0]: 0

Class C network is 1.1.1.0, 0 subnet bits; mask is /24

Configure IPX on this interface? [yes]:

IPX network number [2]:

Configure AppleTalk on this interface? [no]: yes

Extended AppleTalk network? [no]: yes

AppleTalk starting cable range [0]:

Configuring interface FastEthernet1/0:

Is this interface in use? [yes]:

Use the 100 Base-TX (RJ-45) connector? [yes]:

Operate in full-duplex mode? [no]:

Configure IP on this interface? [yes]:

IP address for this interface: 1.1.1.20

Number of bits in subnet field [0]:

Class C network is 1.1.1.0, 0 subnet bits; mask is /24

Configure IPX on this interface? [yes]:

IPX network number [2]:

Configure AppleTalk on this interface? [no]: yes

Extended AppleTalk network? [no]: yes

AppleTalk starting cable range [0]:

Configuring interface Serial1/0:

Is this interface in use? [no]: yes

Configure IP on this interface? [no]: yes

Configure IP unnumbered on this interface? [no]:

IP address for this interface: 1.1.1.30

Number of bits in subnet field [0]:

Class A network is 1.0.0.0, 0 subnet bits; mask is 255.0.0.0

Configure IPX on this interface? [no]: yes

IPX network number [2]:

Configure AppleTalk on this interface? [no]: yes

Extended AppleTalk network? [no]:

AppleTalk network number [1]:

The following configuration command script was created:

hostname Router

enable secret 5 $1$u8z3$PMYY8em./8sszhzk78p/Y0 enable password betty

line vty 0 4 password fred

snmp-server community public

!

ip routing

no vines routing ipx routing appletalk routing no apollo routing no decnet routing no xns routing no clns routing no bridge 1

!Turn off IPX to prevent network conflicts. interface ATM1/0

 

 

Cisco 7401ASR Installation and Configuration Guide

 

 

 

 

 

 

OL-5419-01 B0

 

 

3-19

 

 

 

 

 

Page 79
Image 79
Cisco Systems 7401ASR manual Turn off IPX to prevent network conflicts. interface ATM1/0