Cisco Systems manual Tools and Parts Required, Cisco 7401ASR

Chapter 2 Rack-Mounting, Tabletop Installation, and Cabling

Preparing to Install the Cisco 7401ASR Router

Figure 2-1 Dimensions of Cisco 7401ASR Router

2

1

3

50537

1

2

12.875 in. (32.7cm) 3 11.8 in. (30 cm)

17.3 in. (43.9 cm)

Table 2-1provides dimensions and weight information.

Table 2-1 Cisco 7401ASR Dimensions and Weight

Cisco 7401ASR

Dimensions (H x W x D)	1.72 in. x 17.3 in. x 11.80 in. (4.37 cm x 43.9 cm x 30 cm)
Weight	Chassis fully configured with a port adapter ~ 10.5 lb (4.76 kg)

Tools and Parts Required

Your Cisco 7401ASR chassis is fully assembled at the factory; no assembly is required. However, you need the following tools and equipment to install the chassis and the rack-mount and cable-management kit:

•Number 2 Phillips screwdriver

•A 3/16-inch flat-blade screwdriver

•Tape measure (optional)

•Level (optional)

The rack-mount and cable-management kit includes the following parts:

•Two rack-mount brackets for mounting the chassis in the rack

•One cable-management bracket

•Four 12-24 x 0.5-in. screws to secure the rack-mount brackets to the chassis

•Four 8-18 x .37-in. screws to secure the rack-mount brackets to a 19-inch rack

•Four 8 x .375-in. screws to secure the rack-mount brackets to a 21–23-inch rack

•One M4 x 20-mm screw to attach the cable-management bracket to the rack-mount bracket

Cisco 7401ASR Installation and Configuration Guide

2-2 OL-5419-01 B0