Cisco Systems 7965G, 7945G manual See Placing a Call-Additional Options

If you want to...	Then...
Put a call that has been	1. Press the Enterprise Hold (name may vary) softkey.
picked up on your mobile		The other party is placed on hold.
phone on hold
	2.	On your mobile phone, press the Resume (name may vary) softkey.
		See Switching an In-Progress Call to Another Phone, page 27.
Connect to Mobile Voice	1. From any phone, dial your assigned Mobile Voice Access number.
Access	2.	Enter the number you are calling from, if prompted, and your PIN.
Turn on Mobile Connect	1. Dial your assigned Mobile Voice Access number.
from your mobile phone	2.	Enter your mobile phone number (if requested) and PIN.
	3.	Press 2 to activate Mobile Connect.
	4.	Choose whether to turn on Mobile Connect for all configured
		phones or just one:
		–	All phones—Enter 2.
		– One phone—Enter 1, then the remote destination you want to
			add, followed by #.
Make a call from your	See Placing a Call—Additional Options, page 21.
mobile phone
Turn off Mobile Connect	1. Dial your assigned Mobile Voice Access number.
from your mobile phone	2.	Enter your mobile phone number (if requested) and PIN.
	3.	Press 3 to disable Mobile Connect.
	4.	Choose whether to turn off Mobile Connect for all configured
		phones or just one:
		–	All phones—Enter 2.
		– One phone—Enter 1, then the remote destination you want to
			add, followed by #.
Turn on or off Mobile	1. Press Mobility to display the current remote destination status
Connect access to all your		(Enabled or Disabled).
remote destinations from	2.	Press Select to change the status.
your desk phone
	3.	Press Exit.

Tips

•When calling Mobile Voice Access, you must enter the number you are calling and your PIN if any of the following are true:

–The number you are calling from is not one of your remote destinations.

–The number is blocked by you or your carrier (shown as “Unknown Number”).

50 OL-15896-01