Cisco Systems 7945G, 7965G manual Using a Speakerphone, Using a Wireless Headset

Using a Wireless Headset

Refer to the wireless headset documentation for information about using the wireless headset’s remote features. Also, check with your system administrator to be sure your phone is enabled to use a wireless headset with the wireless headset remote hookswitch control feature.

Using Wideband with your Headset

If you use a headset that supports wideband, you might experience improved audio sensitivity if you enable the wideband setting on your phone (this setting is disabled by default). To access the setting,

choose > User Preferences > Audio Preferences > Wideband Headset.

If the Wideband Headset setting shows as dimmed, then this setting is not user controllable.

Check with your system administrator to be sure your phone system is configured to use wideband. If the system is not configured for wideband, you may not detect any additional audio sensitivity even when using a wideband headset. To learn more about your headset, refer to the headset documentation or ask your system administrator for assistance.

Using a Speakerphone

Many of the actions you can take to dial a number or answer a call will automatically trigger

speakerphone mode, assuming that the handset is in its cradle and is not lit.

If you want to...	Then...
Toggle speakerphone mode on	Press	.
or off
Switch to a handset	Lift the handset.
Adjust the volume level for a	Press	during a call or after invoking a dial tone.
call	Press Save to preserve the volume level for future calls.

Cisco Unified IP Phone 7965G and 7945G Phone Guide for Cisco Unified Communications Manager 7.0 53