If you want to...

Then...

 

 

End your participation in a

Hang up or press EndCall.

conference

 

 

 

Join together two standard

Use the Join or DirTrfr softkeys.

conferences on the same line

Check with your system administrator to see if this feature is

 

 

available to you.

 

 

Tips

Calls must be on the same line before you can add them to a conference. If calls are on different lines, transfer them to a single line before using Confrn or Join.

Depending on how your phone is configured, if you leave a conference after creating it, the conference might end. To avoid this, transfer the conference before hanging up.

Starting or Joining a Meet-Me Conference Call

Meet-Me conferencing allows you to start or join a conference by dialing the conference number.

If you want to...

...Then

 

 

 

Start a Meet-Me conference

1.

Obtain a Meet-Me phone number from your system administrator.

 

2.

Distribute the number to participants.

 

3.

When you are ready to start the meeting, go off-hook to invoke a

 

 

dial tone, then press MeetMe.

 

4.

Dial the Meet-Me conference number.

 

 

Participants can now join the conference by dialing in.

 

Note Participants hear a busy tone if they call the conference before the

 

 

initiator has joined. In this case, participants must call back.

 

 

Join a Meet-Me conference

Dial the Meet-Me conference number (provided by the conference

 

initiator).

 

Note You will hear a busy tone if you call the conference before the

 

 

initiator has joined. In this case, try your call again.

 

 

End a Meet-Me conference

All participants must hang up.

 

The conference does not automatically end when the conference

 

initiator disconnects.

 

 

 

Cisco Unified IP Phone 7970 Series for Cisco Unified CallManager 4.2(3)

33

Page 41
Image 41
Cisco Systems 7970 warranty Starting or Joining a Meet-Me Conference Call