Cisco Systems BC-281 manual DLSw+ Translation Between Sdlc and Token Ring Media Example, BC-322

Configuring Data-Link Switching Plus

DLSw+ Configuration Examples

interface fddi 0 no ip address source-bridge 26 1 10 source-bridge spanning

Router B

source-bridge ring-group 10

dlsw local peer peer-id 132.11.11.3 dlsw remote-peer 0 tcp 132.11.11.2 interface loopback 0

ip address 132.11.11.3 255.255.255.0 interface tokenring 0

no ip address source-bridge 25 1 10 source-bridge spanning

DLSw+ Translation Between SDLC and Token Ring Media Example

DLSw+ provides media conversion between local or remote LANs and SDLC. For additional information about configuring SDLC parameters, refer to the chapter “Configuring LLC2 and SDLC Parameters.”

Figure 137 illustrates DLSw+ with SDLC encapsulation. For this example, 4000.1020.1000 is the MAC address of the FEP host (PU 4.0). The MAC address of the AS/400 host is 1000.5aed.1f53, which is defined as Node Type 2.1. Router B serves as the primary station for the remote secondary station 01. Router B can serve as either primary station or secondary station to remote station D2.

Figure 137 DLSw+ Translation Between SDLC and Token Ring Media

1000.5aed.1F53

					AS/400
						Token
				Token
				Ring		Ring
		500				400
	FEP
4000.1020.1000						Router B
					S8	S0		Token
								Ring
			Router A			S2 S1	100

PU type 2.1	PU type 2.0
sdlc address	sdlc address
D2	01

51863

Router A

hostname Router A

!

source-bridge ring-group 2000

dlsw local-peer peer-id 150.150.10.2 dlsw remote-peer 0 tcp 150.150.10.1

	Cisco IOS Bridging and IBM Networking Configuration Guide
BC-322	78-11737-02