Trunk Interface Cards
Trunk Interface Cards
This section describes the IGX trunks. The card groups are:
•Universal switching module enhanced (UXM-E)
•Network trunk module (NTM)
Note With Release 9.2 and later software, an Cisco IGX 8420 or 8430 switch can support a maximum of 32 trunks.
Table 4-1lists the trunk front cards, and Table 4-2lists the corresponding trunk interface back cards.
Table 4-1 | Trunk Front Cards | |
| | | |
Card Acronym | | Card Name | |
| | | |
UXM-E | | Universal switching module | |
| | | |
NTM | | Network trunk module | |
| | |
Table 4-2 | Interface Back Cards for Trunks | |
| |
Back Card Acronym by Trunk Card Name | |
| | | |
UXM-E | | | |
| | |
BC-UAI-4-155-MMF | 4-port multimode fiber 155Mbps | |
| | |
BC-UAI-4-155-SMF | 4-port single mode fiber 155Mbps | |
| | |
BC-UAI-2-155-SMF | 2-port single mode fiber 155Mbps | |
| | |
BC-UAI-2-SMFXLR | 2-port single mode fiber XLR | |
| | |
BC-UAI-4-SMFXLR | 4-port single mode fiber XLR | |
| | |
BC-UAI-4-STM1E | 4-port synchronous transport module-1E | |
| | | |
BC-UAI-6-T3 | | 6-port T3 back card | |
| | | |
BC-UAI-3-T3 | | 3-port T3 back card | |
| | | |
BC-UAI-6-E3 | | 6-port E3 back card | |
| | | |
BC-UAI-3-E3 | | 3-port E3 back card | |
| | |
BC-UAI-8-T1-DB-15 | 8-port T1 back card with DB-15 connector | |
| | |
BC-UAI-8-E1-DB-15 | 8-port E1 back card with DB-15 connector | |
| | |
BC-UAI-8-E1-BNC | 8-port E1 back card with BNC connector | |
| | |
BC-UAI-4-T1-DB-15 | 4-port T1 back card with DB-15 connector | |
| | |
BC-UAI-4-E1-DB-15 | 8-port E1 back card with DB-15 connector | |
| | |
BC-UAI-4-E1-BNC | 4-port E1 back card with BNC connector | |
| | | |
NTM | | | |
| | | |
BC-E1 | | E1 interface card | |
| | | |
BC-T1 | | T1 interface card | |
| | | |
BC-Y1 | | Y1 trunk interface card | |
| | | |
BC-SR | | Subrate trunk interface card | |
| | | |
4-2Cisco IGX 8400 Series Reference
