Universal Switching Module Enhanced

The maximum throughput is 310 Mbps—two times the OC-3 (STM1) rate. This maximum applies whether the back card is a 2-port or 4-port back card. In practical application, this maximum rate means that most trunk applications with an OC-3 interface would use the 2-port back card.

The UXM-E supports ATM-to-Frame Relay network and service interworking.

For the ABR connection types, the UXM-E supports EFCI marking, Explicit Rate Stamping, and Virtual Source/Virtual Destination (VS/VD).

The UXM-E supports Y-cable redundancy with hot standby for very fast switchover.

The front card has 128K cell buffers.

For statistics support, the UXM-E provides real-time statistics counters and interval statistics collection for ports, lines, trunks, and channels.

The UXM-E can form a logical trunk by grouping more than one T1 or E1 port. The name of this (purchased) option is Inverse Multiplexing over ATM (IMA).

The on-board diagnostics are loopback, self-test, and background.

UXM-E Interfaces

Table 4-4is a list of the UXM-E back cards. Figure 4-3shows the UXM-E front card. Table 4-5defines all possible combinations for the states of the front card status LEDs (Fail, Active, and Standby).

Table 4-4

Back Cards for the UXM-E

 

 

 

Card Name

 

Card Description

 

 

BC-UAI-4-155-MMF

4-port multimode fiber 155 Mbps

 

 

BC-UAI-4-155-SMF

4-port single mode fiber 155 Mbps

 

 

BC-UAI-2-155-SMF

2-port single mode fiber 155 Mbps

 

 

BC-UAI-2-SMFXLR

2-port single mode fiber XLR

 

 

BC-UAI-4-SMFXLR

4-port single mode fiber XLR

 

 

BC-UAI-4-STM1E

4-port synchronous transport module-1E

 

 

 

BC-UAI-6-T3

 

6-port T3 back card

 

 

 

BC-UAI-3-T3

 

3-port T3 back card

 

 

 

BC-UAI-6-E3

 

6-port E3 back card

 

 

 

BC-UAI-3-E3

 

3-port E3 back card

 

 

BC-UAI-4-T1-DB-15

4-port T1 back card with DB-15 connector

 

 

BC-UAI-8-T1-DB-15

8-port T1 back card with DB-15 connector

 

 

BC-UAI-4-E1-DB-15

4-port E1 back card with DB-15 connector

 

 

BC-UAI-8-E1-DB-15

8-port E1 back card with DB-15 connector

 

 

BC-UAI-4-E1-BNC

4-port E1 back card with BNC connector

 

 

BC-UAI-8-E1-BNC

8-port E1 back card with BNC connector

 

 

 

Trunk Cards 4-7

Page 7
Image 7
Cisco Systems IGX 8400 manual UXM-E Interfaces, Back Cards for the UXM-E, Card Name Card Description