Appendix
Firmware
fwUpdateSlot
Update units firmware fwUpdateChassis
Update units firmware fwListFiles
Lists the contents of the firmware RAM disk fwShowUpdateParams
Display firmware default update parameters fwSetUpdateParams
Configure firmware default update parameters showCapability
Display the capabilities/features fwVersion
Display Firmware revisions bootQuery
Query boot image information bootSelect
Change boot selection
Log
logShow
Display the Log file logClear
Clear the Log file logConfigure
Configure the log settings
Note When configuring log devices (option 1), do not change settings for the following devices:
BriefRam: Changes will have no effect.
Console: This device changes log messages that are displayed on the RS232 port.
Trap: Modifying traps may have adverse effects if the device is configured to send traps to a SNMP management station. By default it is configured to send traps. Enabling additional log levels will have no effect, but disabling log levels will prohibit traps from being sent.
These devices are for internal use only.
logSaveAsDefault
Save current log level settings as the defaults logResetToDefaults
Restore the log default settings logSyslogConfig
Configure the syslog host address logShowConfig
Display the current log configuration
KeyManagement
showKeys
Display the list of installed license keys addKey
Install a license key removeKey
Remove a license key
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
92 |
|
|
|
