Cisco Systems SFS 7012 Target Configuration Window Field Descriptions, Snmp Target Addresses

Chapter

Figure 3-32 SNMP Target Configuration Window

The top section of the window, SNMP Target Addresses, allows the user to determine what type of SNMP traps are sent, and where they are sent. The rows provide an area for specifying multiple trap destinations. The bottom section of the window, SNMP Target Parameters, allows the user to configure each trap destination with version, optional security information, and filtering mechanisms.

The Apply button applies the current settings to either the SNMP Target Addresses or SNMP Target Parameters section.

Note The Target Configuration window is used for viewing and modifying existing SNMP target entries. It is not used for creating new target entries.

To create a new target entry, use the following CLI command:

snmpTargetAddr add -n name -a addr [-p port] [-t timeout] [-r retry_count] [-l

tag_list] [-v parameters] [-s storage_type]

For example:

To add a trap target with the IP address 192.168.0.123 that accepts SNMP v2c style traps:

snmpTargetAddr add -n traphost1 -a 192.168.0.123 -p "v2 params"

Or, to add the same target except using SNMP v1traps:

snmpTargetAddr add -n traphost1 -a 192.168.0.123 -p "v1 params"

Target Configuration Window Field Descriptions

The following are descriptions for each field in the Target MIB Configuration window:

SNMP Target Addresses:

•Address Name

Specifies a unique, administrator-defined name the system uses to identify a row.

•Transport Domain

Specifies the transport type of the address contained in the snmpTargetAddrTAddress object.

•Transport Address

Specifies the IP address and port in hex, separated by colons. The first eight values make up the IP address, the last 4 make up the port number. For example, specify 0xc0:a8:00:65:00:a2 for 192.168.0.101 Port: 162.

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

60 OL-8787-04