Chapter 3 Advanced Configuration
24
Dual-Band Wireless-N Gigabit Router

Voice Device

QoS > Voice Device
Enter a Name Enter a name for your voice device.
MAC Address Enter the MAC address of your voice
device.
Priority Select the appropriate priority: High
(Recommend), Medium, Normal or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.

Summary

This lists the QoS entries you have created for your
applications and devices.
Priority This column displays the bandwidth priority of
High, Medium, Normal or Low.
Name This column displays the application, device or
port name.
Information This column displays the port range or
MAC address entered for your entry. If a pre -configured
application or game was selected, there will be no valid
entry shown in this section.
Remove Click this button to remove an entry.
Edit Click this button to make changes.
Click Save Settings to apply your changes or click Cancel
Changes to cancel your changes.
Administration > Management
The Administration > Management screen allows the
network's administrator to manage specific Router
functions for access and security.
Administration > Management
Management

Router Access

To ensure the Router's security, you will be asked for your
password when you access the Router's web-based utility.
The default is admin.
Router Password Enter a new password for the Router.
Re-enter to confirm Enter the password again to
confirm.

Web Access

Web Utility Access HTTP (HyperText Transport Protocol)
is the communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secured Socket
Layer) to encr ypt data transmitted for higher security.
Select HTTP or HTTPS. HTTP is the default.
Web Utility Access via Wireless If you are using the
Router in a public domain where you are giving wireless
access to your guests, you can disable wireless access to
the Router's web-based utility. You will only be able to
access the utility via a wired connec tion if you disable
the setting. Keep the default, Enabled, to allow wireless
access to the utility or select Disabled to block wireless
access to the utility.

Remote Access

Remote Management To permit remote access of the
Router, from outside the local network, select Enabled.
Otherwise, keep the default, Disabled.
Web Utility Access HTTP (HyperText Transport Protocol)
is the communications protocol used to connect to servers
on the World Wide Web. HTTPS uses SSL (Secured Socket
Layer) to encr ypt data transmitted for higher security.
Select HTTP or HTTPS. HTTP is the default.