Chapter 2 Wireless Security Checklist
6
Dual-Band Wireless-N Gigabit Router
Chapter 2: Wireless Security Checklist
Wireless networks are convenient and easy to install, so
homes with high-speed Internet access are adopting them
at a rapid pace. Because wireless networking operates by
sending information over radio waves, it can be more
vulnerable to intruders than a traditional wired network.
Like signals from your mobile or cordless phones, signals
from your wireless network can also be intercepted. Since
you cannot physically prevent someone from connecting
to your wireless network, you need to take some additional
steps to keep your network secure.

1. Change the default wireless

network name or SSID

Wireless devices have a default wireless network name
or Ser vice Set Identifier (SSID) set by the factory. This
is the name of your wireless network , and can be up to
32 characters in length. Linksys wireless products use
linksys as the default wireless network name. You should
change the wireless network name to something unique
to distinguish your wireless network from other wireless
networks that may exist around you, but do not use
personal information (such as your National I nsurance
Number) because this information may be available for
anyone to see when browsing for wireless networks.

2. Change the default password

For wireless products such as access points and routers,
you will be asked for a password when you want to change
their settings. These devices have a default password set
by the factory. The Linksys default password is admin.
Hackers know these defaults and may tr y to use them
to access your wireless device and change your network
settings. To thwart any unauthorised changes, customise
the device's password so it will be hard to guess.

3. Enable MAC address filtering

Linksys routers give you the ability to enable Media Access
Control (MAC) address filtering. The MAC address is a
unique series of numbers and letters assigned to every
networking device. With MAC address filtering enabled,
wireless network access is provided solely for wireless
devices with specific MAC addresses. For example, you can
specify the MAC address of each computer in your home
so that only those computers can access your wireless
network.

4. Enable encryption

Encryption protects data transmitted over a wireless
network. Wi-Fi Protected Access (WPA/WPA2) and Wired
Equivalency Privacy (WEP) offer different levels of security
for wireless communication.
A network encrypted with WPA/WPA2 is more secure
than a network encrypted with WEP, because WPA/WPA2
uses dynamic key encryption. To protect the information
as it passes over the airwaves, you should enable the
highest level of encryption suppor ted by your network
equipment.
WEP is an older encr yption standard and may be the
only option available on some older devices that do not
support WPA.

General Network Security Guidelines

Wireless network security is useless if the underlying
network is not secure.
Password protect all computers on the network and •
individually password protect sensitive files.
Change passwords on a regular basis. •
Install anti-virus software and personal firewall •
software.
Disable file sharing (peer-to-peer). Some applications •
may open file sharing without your consent and/or
knowledge.

Additional Security Tips

Keep wireless routers, access points or gateways away •
from exterior walls and windows.
Turn wireless routers, access points or gateways •
off when they are not being used (at night, during
holidays).
Use strong passphrases that are at least eight characters •
in length. Combine letters and numbers to avoid using
standard words that can be found in the dictionary.
WEB: For more information on wireless
security, visit www.linksys.com/security