Clarion PF-3380I-A user manual ２２． Display Error USB, HUB Error

		User Manual.doc
５-８-２２．		Display ERROR (USB)
		（1/2）
	Function	Display ERROR in USB Mode
	Operation	-
	of button
		It is able to switch other mode or adjust AUDIO when ERROR occurs.
		It will nothing when ERROR occurs in other mode except USB Mode.（Display ERROR only in USB Mode）
		■ Bus Error
		It occurs when more than 1.5A overcurrent caused by USB 5V Bass shorts.
		It displays [CHECK DEVICE].
		It will return by turning ACC OFF/ON.
		It will stop power supply automatically but display nothing when the current is between 1 to 1.5A. It will return
		automatically if the cause of the overcurrent removed.
		■ Unsupported Device ERROR
		It occurs when it is connected to a device which is not supported, such as USB mouse.
		It also occurs when iPod is frozen or cannot communication rightly.
		It occurs if it is connected to an iPod which is not Object iPod. (such as iPod 4G)
		It displays [CHECK DEVICE]. （Refer to Display Specification for Detail）
		It will return when disconnect them.
	Detail	■ Playing ERROR
		It occurs when USB communication disconnected by surge or decoding failure happens when playing..
		It occurs when timeout happens for iPod responses extremely late.
		It occurs when error is notified by iPod.
		It displays [CHECK DEVICE].
		It will return when disconnect them.
		It may return automatically after displaying error because it will retry if you do nothing.
		■ iPod Recognization ERROR
		It will display the ERROR when error occurs when it is certifying the connecting iPod. It mainly happens with
		imitation iPod, Unstable iPod and so on.
		It displays [CHECK DEVICE].
		■ HUB ERROR
		It occurs when it is connected to USB-HUB. Sometimes it also occus if there are both Mass Storage Class and
		HUB Class.
		It displays [CHECK DEVICE].
		It will return when disconnect them.

- 108 / 156 -