Compaq 230934-002, Switch 6 manual Syntax, Config

Command Line Interface

Syntax

Beacon On = Set Switch Beacon ON

Beacon Off = Set Switch Beacon OFF

Examples:

Figure C-4: Beacon On command

Config

This command displays and modifies the switch configuration backup and configuration restore settings. It also activates the backup and restore function. Configuration backup writes the switch’s configuration files to files specified by “file” on the TFTP server specified by the IP address. Configuration restore reconfigures the switch based on the files specified by “file “ from the TFTP server specified by the IP address.

NOTE: When using the “backup” feature, some TFTP servers may not overwrite existing files. These TFTP servers will create a new file with modified filenames, resulting in “restore” not retrieving the expected file.

Syntax:

Config:	Display config backup/restore
settings
Config File = <Filename>	Modify config backup/restore
	filename prefix
Config IP = <0.0.0.0>	Modify TFTP server IP address
Config Backup	Start configuration backup
Config Restore	Start configuration restore

C-6 Modular SAN Array Fabric Switch 6 User Guide