Compaq Switch 6, 230934-002 manual Setting the IP Address, Network Parameters Set IP address

Initial Configuration of the Switch

Setting the IP Address

Select option 2. Set IP address in the Network Parameters menu to call up the IP Address menu shown in the figure below. It displays the current IP address. The default (127.0.0.1) is set at the factory. This address should be changed to an IP address appropriate to your site. Check with the network administrator if uncertain of what this should be. Check with your network administrator before using the default address, as it is a special IP address used for testing purposes only.

Figure 2-3: Network Parameters – Set IP address

Modular SAN Array Fabric Switch 6 User Guide 2-7